Assessment Validation: A Beginner's Guide to Validating Assessments

Assessment Validation: A Beginner's Guide to Validating Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

What are the Two Types of Assessment Validation?

What Does Assessment Validation Mean?

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.

Conversely, post-assessment validation pertains to the implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

This piece will highlight assessment tool validation.

How Assessment Tool Validation is Conducted

With a grasp of the two validation types, let’s focus on assessment tool validation.

Timing for Conducting Assessment Tool Validation

Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.

This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:

- when resources are updated
- you add new training products on scope
- course is reviewed against training product updates
- learning resources are identified as a risk during the risk assessment

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Selecting Training Products for Validation

Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.

Key Resources for Assessment Tool Validation

Academic Resources

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.

Learner/student workbook – assess its appropriateness as an assessment tool. Confirm clear instructions and adequate answer fields. This is a common problem.

Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.

Panel of Validators

Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.

In total, your validation panel must have:

Vocational competencies and industry skills relevant to the unit being validated

Recent knowledge and expertise in vocational teaching and learning

Either of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its future version

Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Assessment Key Principles
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?

Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Rules

Validity – Is the evidence confirming that the candidate has the skills, check it out knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool confirm that the work is the candidate’s own?

Currency – Do the assessment tools mirror current units of competency and modern industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:

Demonstrate What You Teach

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

nappy change

bottle preparation, bottle-feeding infants, and cleaning equipment

solid food prep and feeding infants

respond suitably to infant signs and cues

prepare and settle babies for rest

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Total or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?

Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What kind of information can be included in a work package?

The answer can include:

Required resources

Relevant expenses

Activity duration

Appointed roles and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering controls, administrative controls

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolation, use of engineering controls, administration

Equipment or machinery – isolating, engineering controls, administration

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.